Swing Flex Check Valves

SERIES 5600 is double flanged rubber flapper (swing flex) check valve types suitable for sewage, wastewater, raw water and slurry applications. The valve has a full flow body type, the valve has an elastomeric flexible disc type and the disc is the only moving part that shall assures long life with minimal maintenance. The valve shall have no packing, shafts, arms, mechanical hinges, pivot pins or bearings to wear out

Category:

SERIES 5600 is double flanged rubber flapper (swing flex) check valve types suitable for sewage,
wastewater, raw water and slurry applications. The valve has a full flow body type, the
valve has an elastomeric flexible disc type and the disc is the only moving part that shall assures
long life with minimal maintenance. The valve shall have no packing, shafts, arms, mechanical
hinges, pivot pins or bearings to wear out

overview

Swing flex check valves series 5600 overview
Diameter DN65 – DN 1000
Pressure Rating PN10 – 16
Face to Face

Dimensions

Up to DN600 ACC. TO ISO5752

DN700-1000 ACC. TO DIN3232

Temperature Range -20o to +70o
Flange Dimensions EN1092-2 (DIN2501)
Hydrostatic Testing EN12266, ISO5208
Accessories Hydraulic damper
Type Testing EN1074 – 3
Certificate Manufactured under a certified ISO 9001 quality system
Application Applications including clean and dirty water, sewage, sludge, and slurries.

Features

         Main Product Features

  • Non-clog design, unrestricted flow area combined with smooth streamlined contouring allows passage of large solids and minimizing the potential for clogging.
  • One piece fully encapsulated disc to provide years of trouble-free performance.
  • One moving part, the memory-flex disc is the only moving part, assuring long life with minimal maintenance.
  • No packing, mechanical hinges, pivot pins or bearings to wear out.
  • Drop tight seating, the synthetic reinforced disc, with its integral O-ring type seal design assures positive seating at high and low pressures.
  • Non-slam closure “short disc stroke” combined with memory-flex™ disc action reduces potentially destructive water hammer.
  • Back flow actuator, for use when manual back flow operation is required. most used for priming pumps, back flushing, draining lines and system testing.
  • Flex action, the resiliency of disc ensures non slam closing.

Specifications

Swing flex check valve – TS EN

Swing flex check valve – TS AR

Materials of Construction

Swing flex check material of construction

Dimensions

Technical Data Sheet

swing flex PN10

swing flex PN16

Catalogue

Series 5600 Swing Flex check valves

Scroll to Top